首页 » 解决方案 » ST离线高压电源转换方案 VIPER28

ST离线高压电源转换方案 VIPER28

作者:  时间:2009-06-04 10:48  来源:eaw
ST 公司的VIPER28是离线高压电源转换器,具有800V功率部分,PWM控制,两级过流保护,以及过压和过载保护,滞后的热保护,软起动和故障消除后的自动重起功能.突发模拟工作和非常低功耗(265Vac时为50 mW )满足待机功耗的严格要求. VIPER28主要用作消费类电子和家用电器的电源,ATX辅助电源,中小功率AC/DC适配器,以及STB,DVD播放器,白色家电的开关电源.本文介绍了VIPER28的主要特性,方框图以及简单特性的反激应用框图和满特性的反激应用框图.

VIPER28 Off-line high voltage converters

The device is an off-line converter with an 800 V rugged power section, a PWM control, two levels of over-current protection, over-voltage and overload protections, hysteretic thermal protection, soft-start and safe auto-restart after any fault condition removal. Burst mode operation and device very low consumption helps to meet the standby energy saving regulations. Advance frequency jittering reduces EMI filter cost. The extra power timer allows the management of output peak power for a designed time window. The high voltage start-up circuit is embedded in the device

VIPER28主要特性:

■ 800 V avalanche rugged power section

■ PWM operation with frequency jittering for low EMI

■ Operating frequency:

– 60 kHz for L type

– 115 kHz for H type

■ Standby power < 50 mW at 265 VAC

■ Limiting current with adjustable set point

■ Adjustable and accurate over-voltage protection

■ On-board soft-start

■ Safe auto-restart after a fault condition

■ Hysteretic thermal shutdown

■ Delayed overload protection

VIPER28应用:

■ Auxiliary power supply for consumer and home equipment

■ ATX auxiliary power supply

■ Low / medium power AC-DC adapters

■ SMPS for set-top boxes, DVD players and recorders, white goods



图1.VIPER28典型拓扑图



图2.VIPER28方框图



图3.VIPER28简单特性反激应用框图



图4. VIPER28满特性反激应用框图

相关推荐

飞兆与包尔英特的专利之争:初步裁定结果

飞兆  PWM  2012-05-03

一种新型无源无损软开关Boost变换器

开关电源  软开关  PWM  2011-09-13

TI绿色环保PWM控制器提升电信及工业电源效率

TI  电源控制器  PWM  2011-08-26

基于一种低成本的新型步进电机驱动器的研制

步进电机  PWM  2011-08-05

一种新型无源无损软开关Boost变换器

开关电源  软开关  PWM  Boost  2011-07-11

采用双管正激拓扑构建高性能模块电源

模块电源  MAX5051  PWM  2011-07-04
在线研讨会
焦点