Cypress CY8CLED16P01 MR16 HBLED控制方案

Cypress 公司的CY8CLED16P01 集成了动力线通信(PLC),Powerline Modem PHY和Network Protocol Stack等功能. HB LED 控制器是基于Cypress的EZ-Color 技术,为需要智能调光控制的HBLED应用提供了理想解决方案.CY8CLED16P01 支持多达16路LED,每路的分辨率高达32位.本文介绍了CY8CLED16P01的主要特性,逻辑方框图和PSoC架构,以及实现EZ-Color 解决方案的方框图和MR16灯具中的5V 产生电路, MR16灯具控制电路,PCB外形图和所用元件列表.

The CY8CLED16P01 is an integrated Powerline Communication (PLC) chip with the Powerline Modem PHY and Network Protocol Stack running on the same device. Apart from the PLC core, the CY8CPLC20 also offers Cypresss revolutionary PSoC technology that enables system designers to integrate multiple functions on the same chip.

The HB LED Controller is based on Cypresss EZ-Color™ technology. EZ-Color offers the ideal control solution for high brightness (HB) LED applications requiring intelligent dimming control. EZ-Color devices combine the power and flexibility of PSoC (Programmable System-on-Chip) with Cypresss PrISM™ (Precise Illumination Signal Modulation) modulation technology providing lighting designers a fully customizable and integrated lighting solution platform.

The CY8CLED16P01 supports up to 16 independent LED channels with up to 32 bits of resolution per channel, giving lighting designers the flexibility to choose the LED array size and color quality. PSoC Designer software, with lighting-specific user modules, significantly cuts development time and simplifies implementation of fixed color points through temperature and LED binning compensation.EZ-Colors virtually limitless analog and digital customization enable simple integration of features in addition to intelligent lighting, such as battery charging, image stabilization, and motor control during the development process.

These features, along with Cypresss best-in-class quality and design support, make EZ-Color the ideal choice for intelligent HB LED control applications.

CY8CLED16P01主要特性:

■ Powerline Communication Solution

❐ Integrated Powerline Modem PHY

❐ Frequency Shift Keying Modulation

❐ Configurable baud rates up to 2400 bps

❐ Powerline Optimized Network Protocol

❐ Integrates Data Link, Transport, and Network Layers

❐ Supports Bidirectional Half Duplex Communication

❐ 8-bit CRC Error Detection to Minimize Data Loss

❐ I2C enabled Powerline Application Layer

❐ Supports I2C Frequencies of 50, 100, and 400 kHz

❐ Reference Designs for 110V/240V AC and 12V/24V AC/DC Powerlines

❐ Reference Designs comply with CENELEC EN 50065-1:2001 and FCC Part 15

■ HB LED Controller

❐ Configurable Dimmers Support up to 16 Independent LED Channels

❐ 8 to 32 Bits of Resolution per Channel

❐ PrISM™ Modulation technology to reduce radiated EMI and Low Frequency Blinking

❐ Additional communication interfaces for lighting control such as DALI, DMX512 etc.

■ Powerful Harvard Architecture Processor

❐ M8C Processor Speeds to 24 MHz

❐ Two 8x8 Multiply, 32-Bit Accumulate

■ Programmable System Resources (PSoC® Blocks)

❐ 12 Rail-to-Rail Analog PSoC Blocks provide:

• Up to 14-Bit ADCs

• Up to 9-Bit DACs

• Programmable Gain Amplifiers

• Programmable Filters and Comparators

❐ 16 Digital PSoC Blocks provide:

• 8 to 32-Bit Timers, Counters, and PWMs

• CRC and PRS Modules

• Up to Four Full Duplex UARTs

• Multiple SPITM Masters or Slaves

• Connectable to all GPIO Pins

❐ Complex Peripherals by Combining Blocks

■ Flexible On-Chip Memory

❐ 32 KB Flash Program Storage 50,000 Erase or Write Cycles

❐ 2 KB SRAM Data Storage

❐ EEPROM Emulation in Flash

■ Programmable Pin Configurations

❐ 25 mA Sink on all GPIO

❐ Pull Up, Pull Down, High Z, Strong, or Open Drain Drive Modes on all GPIO

❐ Up to 12 Analog Inputs on GPIO

❐ Configurable Interrupt on all GPIO

■ Additional System Resources

❐ I2C Slave, Master, and Multi-Master to 400 kHz

❐ Watchdog and Sleep Timers

❐ User-Configurable Low Voltage Detection

❐ Integrated Supervisory Circuit

❐ On-Chip Precision Voltage Reference

■ Complete Development Tools

❐ Free Development Software (PSoC Designer™)

❐ Full Featured In-Circuit Emulator (ICE) and Programmer

❐ Full Speed Emulation

❐ Complex Breakpoint Structure

❐ 128 KB Trace Memory

❐ Complex Events

❐ C Compilers, Assembler, and Link


图1.CY8CLED16P01逻辑方框图

图2.CY8CLED16P01 PSoC架构图

MR16灯具

The MR16 fixture is an industry standard lighting fixture. The fixture discussed in this application note has an LED emitter board that forms the primary light source and heat sink connected to an active cooler. The fixture requires a heat sink to remove the heat generated by LEDs. The heat sink is connected to an active cooler device that works on the Peltier cooling effect. The active cooler removes heat from the heat sink. A driver board mounted on the cooler powers it.

图3. 实现EZ-Color 解决方案的方框图

图4.5V 产生电路

图5. MR16灯具控制电路

图6.RS485 收发器电路

图7.LM3404外接驱动器电路

图8.MR16灯具控制板外形(顶层)

图9.MR16灯具控制板外形(底层)

参考设计元件表: