Powerint DER229 27W LCD 监视器电源参考设计
作者: 时间:2009-12-02 13:14 来源:
Powerint公司的TNY375-380 TinySwitch-PK系列集成了700V MOSFET,振荡器,高压开关电流源,限流(用户选择)以及热关断电路.265VAC时没有偏压线圈空载功耗小于170mW,而有偏压线圈空载功耗小于60mW,主要用于高峰值/连续功率比的应用如DVD,PVR,音频放大器,调制解调器以及照片打印机等.本文介绍了TNY375-380 TinySwitch-PK系列的主要特性,方框图,几种应用电路以及27W LCD 监视器电源参考设计DER229 27W LCD 监视器电源参考设计,包括电路图和材料清单.
Low Profile, Low Standby Consumption 27 W Power Supply Using TNY380PN
TNY375-380 TinySwitch-PK Family
TinySwitch-PK incorporates a 700 V MOSFET, oscillator, highvoltage switched current source, current limit (user selectable), and thermal shutdown circuitry. A unique peak mode feature boosts current limit and frequency for peak load conditions. The boosted current limit provides the peak output power while the increased peak mode frequency ensures the transformer can be sized for continuous load conditions rather than peak power demands.
TNY375-380亮点:
Lowest System Cost with Enhanced Flexibility
Simple ON/OFF control, no loop compensation needed
Unique Peak Mode feature extends power range without increasing transformer size
Maximum frequency and current limit boosted at peak loads
Selectable current limit through BP/M capacitor value
Higher current limit extends maximum power in open frame
Lower current limit improves efficiency in enclosed adapters
Allows optimum TinySwitch-PK choice by swapping devices with no other circuit redesign
Tight I2f parameter tolerance reduces system cost
Maximizes MOSFET and magnetics power delivery
ON time extension – typically extends low line regulation range/hold-up time to reduce input bulk capacitance
Self-biased: no bias winding required for TNY375-376; winding required for TNY377-380
Frequency jittering reduces EMI filter costs
Optimized pin out eases pcb/external heatsinking
Quiet source-connected heatsink pins for low EMI
Enhanced Safety and Reliability Features
Accurate hysteretic thermal shutdown with automatic recovery provides complete system level overload protection and eliminates need for manual reset
Auto-restart delivers <3% maximum power in short circuit and open loop fault conditions
Output overvoltage shutdown with optional Zener
Line undervoltage detect threshold set using a single resistor
Very low component count enhances reliability and enables single sided printed circuit board layout
High bandwidth provides fast turn on with no overshoot and excellent transient load response
Extended creepage between DRAIN and all other pins improves field reliability
EcoSmart– Extremely Energy Efficient
Easily meets all global energy efficiency regulations
No-load <170 mW at 265 VAC without bias winding, <60 mW with bias winding
ON/OFF control provides constant efficiency down to very light loads – ideal for mandatory CEC efficiency regulations and 1 W
PC standby requirements
TNY375-380主要应用:
Applications with high peak-to-continuous power demands–DVDs, PVRs, active speakers (e.g. PC audio), audio amplifiers, modems, photo printers
Applications with high power demands at startup (large output capacitance or motor loads) - PC standby, low voltage motor drives
图1.TNY375-380方框图
图2.采用TNY376PN四输出7.5W13W(峰值)通用电压输入电源电路图.
图3.采用TNY380PN 230VAC输入20W连续45W(峰值)电源电路图
采用TNY380PN的小尺寸低待机功耗的27W电源参考设计DER-229
The power supply employs a TinySwitch-PK TNY380PN device (U1) with an integrated high-voltage MOSFET and a controller in a flyback configuration.
DER-229主要特性:
Low cost, low parts count solution
TinySwitch-PK TNY380PN-based solution
No heatsink required
Highly energy efficient
Very low standby consumption
Input power of 82 mW with 30 mW output load, 264 VAC input
Input power <100 mW at no-load, 230 VAC input
High full-load efficiency
>80% efficiency at 90 VAC
Temperature rise meets requirements of LCD monitors
TNY380PN plastic <78℃ (90 VAC, 60 Hz, 25℃ ambient)
Conducted EMI margin >8 dB
DER-229电源指标:
图4.DER-229电源外形图
图5.DER-229电源电路图
DER-229电源材料清单: