| |
| ADI ADIS16209倾斜传感器解决方案 |
| 作者： 时间：2008-08-13 来源:eaw |
| |
ADI的高精度双轴数字倾斜传感器ADIS16209非常适合各种需要倾斜测量的应用,包括测量设备,工厂机器制造工具,卫星天线稳定系统,运动安全监视以及汽车轮胎平衡等.本文介绍了ADIS16209的主要性能,方框图和应用,以及ADIS1620x/PCB评估板的电路图.
High-Accuracy, Dual-Axis Digital Inclinometer and Accelerometer ADIS16209
The ADIS16209 programmable, dual-mode inclinometer sensor is suited to a diverse set of industrial applications that require inclination changes to be measured, including surveying equipment, factory machine tools, satellite antenna stabilization systems, motion safety monitors and automotive wheel alignment. Functionally equivalent inclinometer solutions are typically 100 times larger than the ADIS16209.
The ADIS16209 is a high-accuracy, digital inclinometer, that accommodates both single axis (±180°) and dual-axis (±30°) operation. The standard supply voltage (+3.3 V) and SPI serial interface enable simple integration into most industrial system designs. A simple internal register structure handles all output data and configuration features. This includes access to the following output data:
Calibrated acceleration
Accurate incline angles
Power supply
Internal temperature
Auxiliary analog and digital input signals
Diagnostic error flags
Programmable alarm conditions Configurable operating parameters include
Sample rate
Power management
Digital filtering
Auxiliary analog and digital output
Offset/null adjustment
Self-test, for sensor’s mechanical structure
The ADIS16209 is available in a 9.2 mm × 9.2 mm × 3.9mm LGA package that operates over a temperature range of −40°C to +125°C. It is capable of being attached using standard RoHScompliant solder reflow processes.
主要特性:
Dual-mode inclinometer system
Dual–axis, inclinometer configuration, ±30°
Single-axis, vertical operation, ±180°
High accuracy, 0.1°
14-bit digital inclination data, 0.025° resolution
14-bit digital acceleration data, 0.244 mg resolution
±1.7 g accelerometer measurement range
12-bit digital temperature sensor output
Digitally controlled sensitivity and bias calibration
Digitally controlled sample rate
Digitally controlled frequency response
Dual alarm settings with rate/threshold limits
Auxiliary digital I/O
Digitally activated self test
Digitally activated low power mode
SPI-compatible serial interfaceAuxiliary 12-bit ADC input and DAC output
Single-supply operation: +3.0 V to +3.6 V
3500 g powered shock survivability
应用:
Platform control, stabilization, and alignment
Tilt sensing, inclinometers, leveling
Motion/position measurement
Monitor/alarm devices (security, medical, safety)
Navigation
详情请见:
http://www.analog.com/UploadedFiles/Data_Sheets/ADIS16209.pdf
ADIS1620x/PCB评估板
The ADIS1620x/PCBs are simple evaluation boards that provide convenient access to the ADIS1620x family of products, using a standard 2 mm, 2 × 6, connector interface. These
connectors can be accessed using a variety of cable options, including standard 1 mm ribbon cables. The ADIS1620x/PCB is designed to be evaluated in an existing digital platform (such as MCU, DSP, FPGA, PLD) or as part of the ADISEVAL system.
Four mounting holes (sized for 2-56 or 2 mm screws) have been provided to secure the board during evaluation.
图2. ADIS1620x/PCB 电路图
|
|
|
|
|
