NXP PIP213-12M DC/DC转换器方案

NXP 公司的PIP213-12M 能替代两个功率MOSFET，一个Schottky二级管和驱动IC,主要用于大电流高频同步降压DC/DC转换器。本文介绍了PIP213-12M的主要性能，方框图以及连续输出电流100 A的典型应用电路图。

NXP PIP213-12M DC-to-DC converter power train
The PIP213-12M is a fully optimized power train for high-current high-frequency
synchronous buck DC-to-DC converter applications. The PIP213-12M replaces two power MOSFETs, a Schottky diode and a driver IC, resulting in a significant increase in power density. The integrated solution allows for optimization of individual components and greatly reduces the parasitics associated with conventional discrete solutions, resulting in higher system efficiencies at higher operating frequencies.

主要特性：
Input voltage range from 3.3 V to 16 V
Output voltages from 0.8 V to 6 V
Capable of up to 25 A maximum output current at 1 MHz
Operating frequency up to 1 MHz
Peak system efficiency > 85 % at 1 MHz
Automatic Dead-time Reduction (ADR) for maximum efficiency
Internal thermal shutdown
Auxiliary 5 V output
Power ready output flag
Power sequencing functions
Internal 6.5 V regulator for efficient gate drive
Compatible with single and multi-phase Pulse Width Modulation (PWM) controllers
Low-profile, surface-mounted package (8 mm 8 mm 0.85 mm)

应用：
High-current DC-to-DC point-of-load converters
Small form-factor voltage regulator modules
Microprocessor and memory voltage regulators
Intel DriverMOS (DrMOS) compatible



图1。PIP213-12M方框图

典型应用



图2。PIP213-12M 在四相转换器的典型应用（采用四个PIP213-12M 器件可使连续输出电流100 A，工作频率500 kHz）